Important remarks:
- The REVO DPU only works with REVEX or REVO C units with the DPU version for the input.
- Please select the DPU input option when ordering a REVEX or REVO C that has to work with the REVO DPU power synchronization unit.
- Communication port 1 (MB1) will only be for proprietary protocol, no modbus, in case of DPU input option.
The REVEX PA series is a true universal and very flexible single zone 3 phase thyristor unit.
The most compact thyristorunit in her class worldwide.
The REVEX PA is suited for all kinds of loads.
- the most compact thyristorunit in her class worldwide
- load type (specify at ordering): 3 phase resistive, long-, medium- and short wave infrared (IR) lamps, transformer primary side, MoSi2, SiC and UV
- maximum load current: 35-90A
- maximum load voltage: 480Vac or 600Vac
- firing modes with/without soft start:
- burst firing
- delayed triggering
- phase angle
- zero crossing on/off
- many control modes:
- open loop
- voltage
- voltage square (V2) with transfer to VxI
- current
- current square (I2) with transfer to VxI
- power (VxI)
- external feedback
- Dual current limit for peak and RMS value
- Inputs:
- 0/4-20mA
- 0-10Vdc
- SSR logic signal
- 10k potentiometer
- Very easy configuration with USB interface and free software
- MODBUS RTU RS-485 interface
- fixed fuses included
- optional
- current limit
- heater break alarm to diagnose partial or total load failure + thyristor short circuit
- fieldbus module for ProfiNET, ProfiBUS, Ethernet/IP and MODBUS TCP. Maximum 14 slaves. Module fitted with 2nd MODBUS TCP slave port for HMI
– REVEX series catalogue
– REVEX PA 3 phase 35-90A user manual
– Serial communication manual
– SIEMENS PLC connectivity via TIA portal
Click here to request a quotation for the REVEX PA.
Fast tune: tune the unit quickly for its load
In the fast-tune mode you can quickly and easily configure the unit to its load
Load analyzer
The load analyser gives a live overview of the power going to the load.
REVEX PA 3 phase features
